Electro-Voice Q66 Q Series Power Amplifier, 2 x 600W

Electro-Voice Q series amplifiers offer a package of reliable high output power, high efficiency and legendary pro audio performance. They are the premium choice as system drive for a variety of mobile and club sound systems like e.g. ZX, Tour-X and Phoenix loudspeaker families.

Comprehensive protection system - protection against overheating, overload, short circuit, HF and DC

Patented LPN filter - switchable frequency and phase response correction of connected loudspeakers

• Designed for House of Worship, Pro Music, and other applications.
• Up to 2 x 1200W into 2 ohms
• XLR pass-though input connections
• The NL4 connection on output A also carries output B on pins +/- 2 to allow easy connection to bi-amped loudspeakers
• Switchable LPN filter extra tonal fundamentals and “kick” with a protective low-cut for 12” or 15” loudspeakers without additional subwoofers
• Class-AB design
• Three-stage front-to-rear-fans
• Complete protection package
• Classic EV amplifier dynamic headroom for real-world music and applications
• Built-in dynamic limiters

Ceiling Speaker B404A Stereo

A ceiling mount speaker that provides both left and right stereo channels from a single point, whilst maintaining channel separation. The speaker has dual tweeters combined with a dual voice coil, woofer to deliver a full, rich sound. Ideal for installation in small rooms.

• Ceiling speaker White 6 ½ inch
• Dual Directional Tweeter
• 8 Ohms
• Sensitivity 89dB
• 60W rms
• 120W peak
• 60hz-20Khz
• Push Terminal Connections
  
• Cut out 193mm
• Mounting Depth 85mm from flange
• Back to front of speaker 92mm
  

FBT FORMULA 143FXA Powered Mixer 2x850W 6 Mono 4 stereo channels - FTB Code - 31796

FBT FORMULA 143FXA professional powered mixer offering uncompromised quality,professional components, professional features, professional reliability. Designed with the user in mind, the FORMULA 143FXA is completely Made in Italy by FBT: the most outstanding solution for a wide range of professional sound reinforcement applications.

All functions of the FORMULA 143FXA are 100% professional in terms of design and specification. The mixing section allows 14 channels, 6 mono with XLR/line, insert and 4 stereo with XLR-Mic in and L/R line in.The built-in amps are in PWM technology (Class D) , with single switch mode power supply for each unit. Impressive output continuous power is 2 x 850W in 4 ohm impedance. Lightweight technology developed by FBT makes the FORMULA 143FXA weighting only 14 Kgs, The mono channel features: Gain, HPF 100Hz filter, 3-band EQ with sweepable semi-parametric mid (from 100Hz to 8KHz) at +/- 15dB, 2 x AUX-pre/post, 2 x AUX-post, PAN, MUTE, PFL, 1 x Peak led, 1 x Green Led to highlight the presence of the signal on the channel, 60mm Alps dust protected faders.Stereo channel features: Gain for Mic-in, HPF 100Hz filter, 1 line-in volume, 3-band EQ (HF, MF, LF) at +/- 15dB, 2 x AUX-pre/post, 2 x AUX-post, BAL, MUTE, PFL, 1 x Peak led, 1 x Green Led to highlight the presence of the signal on the channel, 60 mm Alps dust protected faders.

FORMULA 143FXA is equipped with a TRIPLE built-in effect section, completely available to the user for any kind of effect mixing desired. EFFECT A and B are available in all channels, feature Multitap and provide 15 effect banks with 16 variations programmable by the user and through midi. EFFECT C, also with Multitap and through midi programmable, is resident on channel 13/14 and offers 20 effect banks with 16 variations: 4 banks are exclusively dedicated to electric guitar or other musical instruments effects. This Effect C can be used in series or in parallel on the channel.The Master section of the FORMULA 143FXA features AUX 1-2 pre/post selection, MUTE, PFL, switchable anti-feedback filters, sweepable over the range 70Hz – 7kHz, for the swift and precise elimination of feedback between the microphones and monitor loudspeakers. Phantom +48V power supply and more features are also provided.The left and right channels of the 2 x 7-band equaliser used to neutralise problematic room acoustics (with frequency bands optimised for live performance) are separately switchable and adjustable. Extra possibility to assign the EQ section to external devices through the EQ-In / EQ-Out sockets.

The built-in power amps can be used independently from the mixing desk, to drive external passive speakers or monitors. The XLR L/R line outs allow connection of active speaker systems to the mixer.Built-in USB 2.0 input connected to the 2-TRK SND/RTN to record and play your music desired program. Midi In and Thru allow the midi control of the effects.Easy and problem-free handling is assured by a beam running the entire width of the device at the front.
Such a lot for a compact portable power machine! The FBT FORMULA 143FXA is dedicated to those who want to amplify a complete band without any sort of problem. with the immense power output offered (2 x 850Wrms/4 ohm) making it capable of driving a PA in a venue with more than 500 people.FORMULA 143FXA is also suitable for fixed installations where typical configurations with passive speakers are required.

• Freq. response (20Hz-20kHz) mic input (+ 40dB gain) on main output line input ( 0dB gain) on main output -2 / -0,2dB -2 / -0,2dB
• Distortion (1kHz, 16dBu main out) THD + Noise (mic + 40dB gain) THD + Noise (line 0dB gain) (filter 20Hz-20kHz) 0,004% (filter 20Hz-20kHz) 0,0045%
• CMRR (1kHz) micro (+ 40dB gain) micro with PAD (0dB gain) >85dB -
• Crosstalk (1kHz) adjacent channel mute shutoff (fader 0dB mark) fader shutoff (shutoff) -95dB -94dB -92dB
• Noise (22Hz-22kHz Bandwidth) EIN (150ohm source, + 60dB gain) residual output noise (main out, all levels off) main mix noise (all channel routed mix, fader 0dB mark,muted) -126dB -91dBu -80dBu
• Graphic Eq. (+/-15dB gain) 63Hz, 125Hz, 400Hz, 1kHz, 2,5kHz, 6kHz, 12kHz
• Equalization (stereo channel, +/-15dB gain) High High Mid Mid Low Mid Mid Shelving 12kHz -peak 2,5kHz -Shelving 80Hz
• Equalization (stereo channel, +/-15dB gain) High High Mid Mid Low Mid Mid Shelving 12kHz -peak 2,5kHz -Shelving 80Hz
• Max Input Levels micro micro with PAD tape Insert line, stereo + 14dBu -+ 18dBu + 18dBu
• Rated outputs + 4dBu
• Max output + 24dBu
• Input impedance micro line stereo insert in 1,5Kohm bal 20Kohm bal 10Kohm bal min 4Kohm
• Output impedance main,aux,group direct out insert out headphones 600ohm 600ohm 600ohm min 32+32ohm
• Digital Effects Processor frequency response (20-20kHz) number of effects Yes --
• Triple Internal Processors (A,B,C) 24 bit conversion, sampling frequency Frequency response (20-20kHz) A & B programs C programs 48KHz -3dB 240 320
• Built-in amps Output power Input sensitivity 2x850W @230Vac Imp. 4 2x550W @230Vac Imp. 8 Ohm +4dBu with vol. at 0dB
• Power Supply 120Vac /230Vac50/60Hz 2000VA peak
• Net Dimensions mm/inch (LxAxP) 570x180x516 22,4x7x20,3
• Net Weight Kg/Lb 19 / 41,9
• Transport dimensions mm/inch (LxAxP) 650x270x 570/ 25,5x10,6x22,4
• Transport weight Kg/Lb 21 / 46,3

Adastra A120 - A120 mixer amplifier 100V line

4 channel mixer amplifier providing 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent amplifiers.

Features

4 input channels
Switchable phantom power (XLR)
Switchable VOX mic priority
8 ohms and 100V line outputs
Bass and treble EQ
Peak and signal LEDs
2U 19" rack mountable
Mains or D.C. operation

Technical Specifications

Power : Mains : - 230Vac, 50Hz
Frequency response : - 100Hz - 12kHz (+/-3dB)
Input impedance : Mic : - 1.8k Ohms
Input sensitivity : Aux/Line : - 300mV (-10.4dBV)
Input sensitivity : Mic channels : - 1.5mV (-56.4dBV)
Signal to noise ratio : Line : - >75dB
Signal to noise ratio : Mic : - >70dB
Output : Line : - 1V @ 600 Ohms
Outputs : Speaker : - 8 Ohms & 100V
Dimensions : - 425 x 88 x 230mm
Power : Battery : - 24Vdc (8A)
DC power : - 92W
Output power : Max. : - 160W
Output power : RMS < 2% T.H.D : - 120W
Weight : - 10.0kg

FBT VERVE 152 Passive PA Speaker 2 -way 8 Ohm 1400W - FTB Code - 23514

FBT VERVE 152 is a two-way design incorporating a B&C 15” low frequency woofer with a neodymium magnet and a B&C 2.5” High frequency driver coupled to a rotatable 60°H x 40°V horn. Thanks to the rotatable HF horns, it is possible to create Horizontal arrays of 3 enclosures for a total coverage of 120° and a Max. SPL of 134dB. FBT active internal crossover is at a fixed frequency of 1.6k. With a frequency range of 47Hz - 18kHz, the Verve 152 provides hi fidelity sound for both speech and music applications with a maximum SPL of 126.5 dB. A front face steel grille protects the woofer from external damage. FBT’s S.T.E.P. (Soft Trip Electronic Protection) circuitry protects speaker/driver components against failure.

Applications : Live Sound P.A. System or Live Sound Monitor, D.J. System School & Corporate Audio Visual Sound Reinforcement Background Music/Announcement: Restaurants, Pubs Transportation Terminals, Clubs, Auditoriums, Theatres, Gyms, Houses of Worship

• 2-way, bass reflex
• 380 mm (15”) B&C custom neodymium woofer with 75 mm(3”) voice coil
• 1x51 mm (2”) B&C titanium compression driver with 65 mm (2”) voice coil
• 60°H x 40°V rotatable horn
• 6xM10 anchoring points, 35 mm ø (1.38”) top-hat for speaker stand, placement and wall bracket mounting, 2 metal carrying handles
• 18mm (0.7”) birch plywood scratch resistant enclosure
• Ideal for sound reinforcement and permanent installations, possible horizontal array setup of 3 speakers with total coverage of 120° and 134dB maximum SPL/1m
• Compact weight (30,5 Kg/67.24 Lb)
• Passive version, 700Wrms/8ohm recommended amplifier
• Passive crossover filter featuring “soft-trip” circuitry to ensure full protection of the LF woofer and HF driver
• 2 NL-4 Neutrik™ Speakon inputs

Background Music 100v Line Amplifier Ceiling Speaker Package for Shops Pubs Restraunts

Amplifier - A50 MIXER AMPLIFIER 3 CHANNEL 50W RMS

A compact PA amplifier offering a range of comprehensive features, excellent performance and reliability for use in a wide variety of small to medium installations. The unit offers an output of 50Wrms featuring a balanced microphone input with switched VOX priority and mic/telephone selection on Channel 1, aux/mic input option on Channel 2.

Speakers - CC SERIES 2-WAY CEILING SPEAKERS

2-way quick fit ceiling speakers with PP mica bass driver and directional dome tweeter giving an excellent frequency response, all housed in a white polymer frame with metal grille.

CC8V: 8" Tappings 10, 20, 30, 40, 50W & 8 ohms

CC6V: 6.25" Tappings 2.5, 5, 10, 15, 20W & 8 ohms

CC5V: 5.25" Tappings 2.5, 5, 10, 15, 20W & 8 ohms

Cable - HEAVY DUTY DOUBLE INSULATED 100V LINE SPEAKER CABLES - PURE COPPER

Heavy duty 2 core speaker cable suitable for 100V line PA speaker installations. Stranded copper conductors with red and black inner insulation and overall black PVC sheath. Red and black conductors.

100V VOLUME CONTROLS

High quality attenuators supplied complete with plastic surface mount back box. The stylish ABS faceplate is fitted with a matching plastic knob. Each attenuator is fitted with a relay for muting output remotely from a fire alarm panel.

Help.....

There are some factors that need to be considered when designing your system. As a golden rule, the total wattage of all speakers in the system should NOT exceed the output wattage of the amplifier. You can combine different wattage speakers into the same system if you wish, but only if the combined power of all the speakers is not greater than the output power of the amp. You will find the transformers in some speakers have a number of wattage taps that you can select from, for example a 15w speaker might have 5, 10 and 15w taps. Select whichever is most appropriate to your needs, if you want to combine many speakers on the same line then it makes sense to use the lower wattage taps. You could have twice as many speakers driven from the same amp if you used the 5w tap as opposed to the 10w.

SKB Cases 1SKB-D1113 Roto-X Percussion 11 X 13 Tom Drum Case

SKB Cases Revolutionary Roto-molded D-shaped drum case design with molded in feet for upright positioning and stability.1SKB-D1113 Patented Roto-X pattern for durability and reliable stacking. Sure grip handles with a 90° stop are designed for easy lifting and transporting. Drum Cases have revolutionized affordable drum protection. The entire SKB Cases line is truly a breakthrough in case protection for drums. With Padded interiors for added protection.

• Stackable for convenient storage
• Pedestal feet
• Padded interiors for added protection
• Heavy-duty web strap for reliable closure
• Sturdy high tension slide release buckle
• Interior Depth 13.50 in 34.29 cm
• Diameter 15.25 in 38.74 cm
• Shipping Weight 8.50 lb 3.86 kg
• Product Weight 6.50 lb 2.95 kg

Trantec S4.4W S4.4W-EA-UK Headworn Aerobic System with Belt Wireless Radio Microphone SJ-66 Mic

The S4.4W-EA-UK Trantec wireless radio microphone system provides fitness and aerobic facilities with the smartest choice for all their wireless needs. The system can offer a choice of 4 selectable frequencies on UHF band 863-865MHz (licence exempt) which you can operate up to 4 systems to work simultaneously.

The Trantec S4.4W comes with our popular SJ66 Aerobic headworn microphone. This heavy duty waterproof microphone is designed for years of rugged use.

The adjustable gooseneck boom is sealed for protection against water, dust, and perspiration. It is surprisingly light and flexible for a comfortable fit. It has an adjustable headband for secure placement during the most rigorous exercise routines, also available in a choice of three colours Black, Blue & Yellow. Also included with the system is our neoprene belt, which provides freedom of movement and protects your transmitter.

This selectable frequency system allows for operation even in larger cities where broadcast interference and other wireless systems can create problems, making the Trantec S4.4 the idea choice for fitness and aerobic facilities.

TECHNICAL SPECIFICATION S4.4RX RECEIVER RF Frequency Range: Channel 70 Frequencies; 863.150, 863.725, 864.150, 864.850MHz
4 Channel Capability
Audio Frequency Response: Handheld 80Hz-16kHz (+/-3dB), Belt pack 60Hz-16kHz (+/-3dB)
Audio S/N Ratio:>96dBA
Audio output: Variable to +10dBu via unbalanced 1/4" mono jack, +16 dBu via balanced XLR 3F
Display: 4 position RF bar graph, AF Peak (Overload), Diversity A/B
DC Input:12V, 100mA
Dimensions: 35 x 213 x 98mm
Weight: Approx 580g


S4.4LTX BELTPACK TRANSMITTER 4 Channel capability
Controls: Frequency select, On/Off switch, Lapel/Instrument select, Gain adjust
Indicator: Battery status LED
Operating voltage 9v @ <50mA
Operating time approx 10 hours
Power Output: Max 10mW
Connectors: Audio input via 3.5mm jack socket
Dimensions: 60 x 100x 30mm including belt clip
Weight: Approx 90g
Fully meets with requirements of ETSI 300-422/455, FCC part 74h

MIC/X-66 AEROBIC HEADWORN MICROPHONE Polar Pattern: Super Cardioid
Nominal Impedence: 3 Kohms
Max SPL: < >120dB
Operating Voltage: 2-20 volts min/max
Current Consumption: 50u
Frequency response: 200Hz -16kHz
Cable Length: 1500mm
Colours Available: Black , Blue & Yellow
Termination: 4 pin mini xlr plug

Primacoustic VoxGuard Microphone Ambient Noise Nearfield Absorber

VoxGuard by Primacoustic is light weight and extremely easy to use. It starts with a high-impact ABS outer surround shell that snugs onto the mic stand using an included adapter to hold it in place. Light weight design makes positioning the VoxGuard easy without the usual fear of the stand falling over.

VoxGuard is effective when used with round base stands, tripods and even with large studio booms. Once mounted, an innovative rear access cable port allows the microphone to be articulated and directed at a specific source, thus enabling the VoxGuard to also be used as an acoustic screen.

Acoustic magic is performed by a high-density open cell acoustic foam liner. This absorbs the voice range while keeping room ambiance out to produce a dry rendering. The VoxGuard is 50% larger than comparable products, noise flanking is significantly reduced and performance vastly improved.

Primacoustic VoxGuard is ideal for recording studio vocals, voice-over tracks for film and TV post production, pod casting and field reporting.

VoxGuard employs well known acoustic principles to minimize room ambiance from entering the microphone allowing a greater percentage of the source to be captured without the echo, reverb and resonance from the room.

Eliminating The Sound Of The Space

Put up a microphone in a room and hit 'record'. The sound of the voice will compete with the sound echoing off the walls. These are known as primary reflections, flutter echo and standing waves. These will invariably arrive at the microphone after the original sound and depending on how loud they are, will cause varying degrees of phase cancellation known as comb-filtering.

When singing into the microphone, sound is captured by the mic while a good percentage of sound breezes by. In space, this 'extra' sound would go forever without echo as there are no boundaries. In an anechoic test chamber, sound is completely absorbed as there are no hard reflective surfaces. In this case, the VoxGuard's high density open-cell acoustic panel absorbs much of the energy in the critical voice range.

VoxGuard's curved outer shield is designed to reflect unwanted energy away while the larger size—upwards to twice as big as others —reduces flanking. This effectively creates a boundary that stops sound from coming back into the mic, reducing the ambient effect.

• affel Material: SP-9010 ABS plastic shell, 3/16" (4.5mm) thickBlack with textured finish
• Absorber Material: 1" High-density open cell acoustic foam,
  2.2 lb/per cu-ft, charcoal color
• Dimensions: 18" (wide) x 15" (tall) x 7.5" (deep)
  457mm (wide) x 381mm (tall) x 190mm (deep)
• Order Number: P300-0100-00
• Mounting Hardware: Threaded mic stand adapter and knurled ring inluded.

For added flexibility, the VoxGuard has been designed with a cable access slot to allow typical dynamic microphones such as a ShureSM58 or Sennheiser MD412 to be used.

Recording Vocals In The Control Room

The most common application for the VoxGuard is using it to control the spill and reverberant field in a recording studio. Simply mount the microphone in the VoxGuard and you are set to go. For greater acoustic control, having the artist’s back to a treated wall surface can further reduce the ambient field. Often, artists find that singing in the control room to be uncomfortable. The VoxGuard provides an instant vanity screen.

Isolating An Acoustic Guitar Instrument Microphone

VoxGuard’s innovative design allows an excellent means of attenuating other instruments from spilling into the mic. Mount the VoxGuard onto microphone stand and the mic onto the VoxGuard… point and record! With VoxGuard you hear more of what you want and less of what you do not!

SKB 1SKB-R914U20 14U Roto Shockmount Rack Case - 20" Deep Flight Case

Based on the Ultimate Strength Series design, the Roto Shockmount Rack Cases provide added protection for sensitive gear. With an internal frame mounted on adjustable elastomer shock absorbers on all eight corners, this revolutionary design controls the effects of shock and vibration on all three axes. The "sway" space around the internal frame provides natural air conditioning — very important for delicate equipment. They are less than half the weight of old fashioned wood racks.

Features & Benefits

• Threaded steel rails
• Rear rails
• Shock resistant
• Optional caster kit
• Roto molded for strength
• Adjustable elastomer shock absorbers
• Molded-in handles provide secure grasping points
• Interlocking X-pattern for solid stackability
• Front and rear full size lids
• Recessed latches
• Shock absorbing feet

• Exterior Depth 28.00 in 71.12 cm
• Exterior Width 29.13 in 73.98 cm
• Exterior Height 33.25 in 84.46 cm
• Rack Space Units Total 14
• Rack Depth Front Rail to Back Lid 23.25 in 59.06 cm
• Rack Depth Front Lid To Back Lid 20.00 in 50.80 cm
• Lid Depth 3.25 in 8.26 cm
• Shipping Weight 73.00 lb 33.11 kg
• Product Weight 68.55 lb 31.09 kg
Excl. VAT £456.00 Incl. VAT £547.20
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/shure-se315-cl-efs-sound-isolating-earphones-clear-iem.html

Shure SE315-CL-EFS Clear Sound Isolating Earphones IEM

SE315 Shure Sound Isolating Earphones feature single High-Definition MicroDrivers for full range audio. The Tuned BassPort optimizes low-end performance utilizing a vented driver. A detachable, Kevlar® reinforced cable with formable wire allows for easy replacement and secure, comfortable fit.

Maximum Performance out of a single driver

The single driver of the SE315 is housed in a uniquely designed internal assembly. It delivers the maximum performance out of a single driver for a clear and pristine extended audio range – on-stage and on the go. It also has Tuned BassPort technology which optimizes the low end performance.

Sound Isolating Design

Sound Isolating Earphones were originally developed as Personal Monitor Systems to allow musicians to hear their own performances in loud onstage environments.
They work by using soft, flexible sleeves to block up to 90 % of the background noise. You can concentrate on your music, whether you are on-stage, in a train, on the street or working out. At the same time you can reduce the audio level to conserve your hearing.

Detachable cable with wireform fit

The SE315 features a durable Kevlar® reinforced cable that allows easy replacement or customisation. The formable wire ensures secure placement, and over the ear configuration keeps cables out of the way. The gold plated MMCX connector has a lock-snap mechanism allowing 360 degree rotation for comfortable fit.

An assortment of sleeves for individual fit

Because every ear is different, the Fit Kit includes an assortment of foam and silicone sleeves in different sizes. Experiment with the size and style that creates the best fit for you. A good seal is key to optimizing sound isolation and bass response as well as maximizing comfort during extended wear.

Included Fit Kit

• Soft-zip carrying case
• An assortment of Sound Isolating foam, silicone and triple flange sleeves

Speaker Type
Single High-Definition MicroDriver + Tuned BassPort

Sensitivity (1kHz)
116 dB SPL/mW

Impedance (1kHz)
27 Ω

Noise Attenuation
Up to 37 dB

Frequency Range
22Hz – 18.5kHz

Input Connector
Gold-plated 3.5 mm (1/8”)

Cable
64” Detachable (at ear) with wireform fit

Excl. VAT £139.00 Incl. VAT £166.80
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/shure-520dx-green-bullet-harmonica-microphone.html

SHURE 520DX Green Bullet Harmonica Microphone Omnidirectional Dynamic with Volume Control, High Z, "The Green Bullet" for harmonica

Legendary among harmonica players for its classic blues harp sound, the Shure 521D's tradition is carried on by the 520DX "Green Bullet" and has a contoured size and shape that fits perfectly between harmonica and hands.

520DX features a volume control knob at the base of the microphone that allows users to make adjustments to suit their needs during live performance. An attached cable with a standard 1/4-inch plug allows the microphone to be connected to a high-impedance device.

Shure 520DX has predominately been used for the harmonica, but can also be used for distinct, lo-fi vocals. The 520DX which is known as "Green Bullet" holds a spot in history as the definitive blues harp voice.

• Volume control knob allows users to adjust the volume to fit each musical situation
• Rugged, dynamic
• High-impedance, omnidirectional
• Supplied with 1/4 inch connector
• Frequency response 100 to 5,000 Hz
•  Transducer :Type Dynamic
• Polar Pattern:Omnidirectional
• Frequency Response: 100 Hz - 5 kHz
• Sensitivity (1 kHz): -38 dBV/Pa / 12,5 mV/Pa
• Weight: 737 g
Excl. VAT £109.00 Incl. VAT £130.80
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/skb-3i-4214-56-waterproof-les-paul-style-guitar-flight-case.html

SKB Cases 3i-4214-56 Waterproof Les Paul Style Guitar Flight Case

SKB is revolutionizing the industry again with the first INJECTION molded guitar case! The 3i-4214-56 accommodates Les Paul style guitars and is the latest size in SKB's 3i series of waterproof cases.

3i Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system with TSA recognized and accepted locks, four reinforced locking loops for customer supplied locks,comfortable, snap-down rubber over-molded cushion grip handles, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

 

The plush interior provides total neck support and protection on all sides.

Features and Benefits

• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patented"trigger release" TSA Locking Latch system
• Reinforced locking loops for customer supplied locks
• Rubber over-molded cushion grip carrying handle and pull handle
• Convenient quiet-glide wheels
• Large accessory compartment

Weights & Dimensions

• Exterior Length 45.00 in 114.30 cm
• Exterior Width 17.25 in 43.82 cm
• Exterior Depth 6.50 in 16.51 cm
• Instrument Body Length 17.50 in 44.45 cm
• Instrument Body Depth 2.65 in 6.73 cm
• Instrument Lower Bout 13.10 in 33.27 cm
• Instrument Upper Bout 9.75 in 24.77 cm
• Lid Depth 1.50 in 3.81 cm
• Base Depth 4.00 in 10.16 cm
• Shipping Weight 22.00 lb 9.98 kg
• Product Weight 19.00 lb 8.62 kg
Excl. VAT £197.99 Incl. VAT £237.59
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/qsc-k8-active-pa-speaker.html

QSC Audio K8 Active PA Speaker

Features

• Lightweight portable powered speakers with legendary QSC amplifier power and reliability
• 1000 watt continuous Class D power modules in all models
• Extensive DSP enhances system performance
• Attractive and professional appearance
• Rugged ABS enclosures
• Powder coated steel grille
• Comfortable ergonomic handles
• 35 mm pole sockets with Tilt-Direct™ (fullrange models)

The QSC K Series is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.

Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.

Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.

Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.

On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP™ for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.

Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.

The K Series fullrange models feature a unique Tilt-Direct™ pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).




Extensive DSP

• DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
• Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
• DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
• GuardRail™ protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.

 

K Series
SPECIFICATIONS	K8
Configuration	Trapezoidal 2-way
Transducers   Low-frequency   High-frequency	8" cone transducer 1.75" diaphragm compression driver
Frequency Response (-6 dB)	66 Hz - 18 kHz
Frequency Range (-10 dB)	61 Hz - 20 kHz
Nominal Coverage (-6 dB)	105° conical
Maximum SPL1	127 dB peak
Amplifiers
Power Output2	1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak
Input Impedance (ohms)	XLR / ¼": 40k balanced / 20k unbalanced XLR / ¼" MIC mode: 2260 balanced RCA: 10k
Controls	Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators	Power, Signal A, Signal B, Standby, Limit, Mic
Connectors	Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling	On demand, 50 mm variable speed fan
Amplifier Protection	Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection	Thermal limiting, excursion limiting
AC Power Input	Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power)	100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A
Enclosure
Material	Impact resistant ABS
Finish	Black paint
Grille	Black powder coated 18 gauge steel
Dimensions (HWD)	17.7" x 11" x 10.6" 450 mm x 280 mm x 269 mm
Weight (Net)	27 lb / 12.2 kg
Available Accessories	K8 TOTE, K8 YOKE, K SERIES M10 KIT

¹ For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.

² Independent of limiters and driver protection circuits.




Enclosure Dimensions







All Specifications Subject to Change Without Notice.



Excl. VAT £485.00 Incl. VAT £582.00
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/primacoustic-australis-bass-trap.html

Primacoustic Australis Bass Trap Solid block of high density open cell foam for maximum absorption

Primacoustic Australis is an effective studio bass trap designed to control low frequency energy and help reduce modal distortion in studios.

The Australis measures a full 12" x 36" and is made from a solid block of high-density 1.7 lb open-cell acoustic foam. The large size and high density combine to deliver optimal absorption in the all important bass region.

The Australis works by trapping the random omni-directional bass energy that tends to cluster in corners and overwhelm the room. Quarter-wavelength calculations prove that Australis is particularly effective for studios that have modal problems in the 75Hz to 200Hz range. Once in place, it has the positive effect of reducing smear, giving bass more definition and punch while allowing recordings to translate better to other rooms.

The attractive wedge design allows easy placement in corners using the supplied impalers. For even greater bass absorption, Australis can be stacked, grouped to form a wall cluster, or placed edge-to-edge at the wall and ceiling seam. And as with all Primacoustic foam products, Australis employs a fire retardant to meet California 117 code. This makes the Australis an excellent choice for use in home studios, home theatre and music practice rooms..

• Solid block of high density open cell foam for maximum absorption
• Flexible wedge design is easy to mount in and corner
• Effective from 75hz and up throughout the audio bandwidth
• Helps control room modes and tightens bass response
• Ideal for small rooms where modes are problematic

Australis bass trap is a corner mounted device that hangs in place using the supplied impalers. Installation is easy: All you do is screw the impalers into the wall surfaces using standard wall anchors then 'push' the Australis down so that it impales itself.

Once in place you will immediately notice the bass tightening up and a more even frequency response as you move around the room. For larger spaces or for those that want more bass attenuation, you can stack Australis traps on top of each other. The larger size not only increases low frequency absorption, but also lowers the effective cutoff point.

In spaces where wall to wall corners may not be available, you can mount Australis bass traps up high at the wall and ceiling junction. This requires using the impalers on the wall and then gluing the Australis to the ceiling using any standard construction adhesive.

The Australis can be mounted anywhere. And even though this is a bass trap, the Australis is very effective at also absorbing mid and high frequencies. This is why most people will mount the Australis at ear level where it will also serve to attenuate powerful primary reflections.

Material:	High density open-cell acoustic Primafoam
Dimensions:	36” (914mm) x 12” (305mm) x 12” (305mm)
Color:	Charcoal
QTY:	Includes two Australis bass traps per order.
Order Number:	Z810-1008-00
Mounting Hardware:	Wall mounting impalers and drywall anchors included.

Excl. VAT £199.99 Incl. VAT £239.99
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/radial-jdi-passive-di-direct-injection-box.html

Radial JDI Passive DI Direct Injection Box

• Jensen Transformer equipped passive DI
• Eliminates hum and buzz from ground loops
• Virtually zero phase & harmonic distortion
• Exceptional signal handling and noise rejection

 

Radial JDI is a passive direct box designed to handle extreme signal levels without distortion of any kind.  Unlike an active DI that is limited by the buffering amplifier’s rail voltage, the JDI employs a Jensen audio transformer as the engine.  Jensen transformers are legendary in their ability to gracefully handle transients while delivering a smooth, warm sounding Bessel curve, reminiscent of the finest vintage gear. Ruler flat from 10Hz to 40kHz and with virtually zero phase deviation, the JDI delivers the natural, pure sound of the instrument without artifact.

The 100% passive circuitry inside the JDI is incredibly efficient. The transformer performs both high-to-low impedance conversion and signal balancing at the same time with minimal loading and does so without any power whatsoever. The transformer also introduces a magnetic bridge that passes signal while rejecting stray DC voltage. This makes the JDI particularly adept at eliminating hum and buzz caused by ground loops.

Features include input and throughput ¼” connectors, -15dB input pad, ground lift, and 180 degree polarity reverse to help phase align the instrument with the PA. A secondary circuit is added for direct interfacing with high output devices such as guitar or bass amp loudspeakers. And a unique merge function allows stereo sources such as keyboards to be summed mono, saving valuable input channels.

Built tough to handle the abuse of live touring, the JDI features a 14-gauge welded steel I-beam inner frame and a unique book-end outer shell. The innovative design eliminates stress on the PCB, reducing opportunity for solder joints to go ‘cold’ while the outer shell creates a protective zone around the switches and connectors. The steel casing resists noise-causing electromagnetic pollution and the transformer’s sensitive inner workings are further protected from magnetic fields with a mu-metal can. This ensures the signal transfer is quiet and free from hum.

These combined features have made the Radial JDI the most popular passive direct box in professional touring and an excellent choice for instrument interface in the studio!

Excl. VAT £133.80 Incl. VAT £160.56
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/shure-55sh-2-microphone-vintage-style.html

SHURE 55SH Series II Dynamic Vocal Microphone Vintage Style Cardioid Dynamic, Low Z, On-Off Switch

The Model 55SH Series II provides the Shure classic UNlDYNE II design coupled with modern acoustic components to meet today's performance standards. This microphone is excellent for vocal pickup with its characteristic Shure presence peak.
The 55SH Series II has a cardioid (unidirectional) polar pickup pattern that minimizes sound pickup from the rear of the microphone. This allows the Model 55SH Series II to be used in close proximity to loudspeakers without creating feedback problems, and it can perform under adverse acoustic conditions where omnidirectional microphones cannot.

Excl. VAT £125.00 Incl. VAT £150.00
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/skb-cases-1skb-sc191u-1u-audio-soft-rack-flightcase.html

SKB Cases 1SKB-SC191U 1U Audio Soft Rack Flight Case

1SKB-SC191U by SKB Cases is primarily designed for wireless microphone systems, the 1SKB-SC191U flight case, a 1U rack size, is constructed of a wood core covered by 600 Denier Nylon. The case could also be used for pre-amps, effects, etc. This soft case has been developed with the focus on portability and includes an adjustable shoulder strap and loop handle for easy transport.

The 14.8” depth (front rail to back flap)of the SKB 1SKB-SC191U flightcase provides plenty of room for the most popular wireless systems. The padded front and back lid has heavy duty zippers that allow for the flaps to open fully and fold underneath. A zippered pouch on the inside front flap provides excellent storage of wireless mic antennae. An ample sized exterior zippered pouch is ideal for cables and/or body packs. Threaded steel rack rails are recessed to provide protection for equipment controls without inhibiting proper antennae placement. These cases are covered by SKB’s one year Soft Product warranty.

• Constructed of wood a wood core covered by 600 Denier Nylon
• Adjustable shoulder strap and loop handle for easy transport
• 14.8” depth (front rail to back flap}
• Padded front and back lids have heavy duty zippers
• Exterior zippered pouch is ideal for cables and/or body packs
• Recessed threaded steel rack rails
• Covered by SKB's One Year Soft Product Warranty
• Interior Length 16.25 in 41.28 cm
• Interior Width 19.00 in 48.26 cm
• Interior Depth 1.75 in 4.45 cm
• Exterior Length 17.50 in 44.45 cm
• Exterior Width 20.75 in 52.71 cm
• Exterior Depth 3.75 in 9.53 cm
• Rack Space Units Total 1 1
• Rack Depth Front Rail to Back Lid 14.50 in 36.83 cm
• Rack Depth Front Lid To Back Lid 15.75 in 40.01 cm
• Base Depth 0.00 in 0.00 cm
• Shipping Weight 9.00 lb 4.08 kg
• Product Weight 6.55 lb 2.97 kg

* 1.25" Front Rail Clearance

SKU : SKB 1SKB-SC191U

Excl. VAT £39.99 Incl. VAT £47.99
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/mcgregor-sa200-mosfet-slave-amplifier-2-x-100w.html

McGregor SA200 MOSFET slave amplifier - 2 x 100W

SA200 Amplifier by Mcgregor Amplification has dual channel 1U power amplifiers has been designed to complement the McGregor range of 1U mixer amplifiers. They are ideal for boosting power levels, driving additional zones, or simply extending bass response with additional bass bins. 250 watts and 100 watts per channel options are available.

• Master Volume controls with twin 5 segment led VU power output displays
• Active clip limiter (internally configurable off to max).
• Speakon speaker sockets
• Fan cooled with proportional speed fan
Excl. VAT £208.99 Incl. VAT £250.79
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/qtx-sound-19-dual-cd-player-mixer-case-kit.html

QTX Sound - 19" Dual CD Player, Mixer & Case Kit

This DJ starter kit offers an all-in-one system for the mobile DJ. It includes a dual CD-player with anti-shock, instant start, pitch control and jog wheels to manually adjust the playback speed. Coupled together with a 4-channel mixer which includes a total of 16 inputs: 4 main microphones, 1 auxiliary microphone, 3 phono and 8 line. All housed in a black carpet covered case ready to go.

Features

Dual CD-player with anti-shock
Jog/shuttle wheels for frame by frame search
Instant start
Pitch control +/-16%
4-channel DJ mixer
4 balanced microphone inputs with effects
4 music channels with 12 inputs
14-band master EQ +/-12dB
BNC light socket
Headphone mix
Balanced XLR master output
Carpet covered 2-5-2U case

Technical Specifications

Power supply : - 115V/230V 60Hz/50Hz
Dimensions : - 550 x 520 x 360mm
Weight : - 28kg

Excl. VAT £275.00 Incl. VAT £330.00
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/shure-pg48-xlr-vocal-microphone.html

SHURE PG48 XLR Cardioid Dynamic Vocal microphone, On-Off Switch, includes XLR to XLR Cable

A great performance microphone for spoken word applications.PG 48 On-Off Switch, includes XLR to XLR Cable

Shure PG48XLR is a professional quality vocal microphone. This entry level microphone has been designed with rugged durability and excellent sound for use in spoken word and karaoke.

Best suited to: Speech

Also great for: Vocals

The PG48 would be an ideal choice for an amateur musician who is looking to upgrade their standard vocal mics. Other applications could include speeches, pub quizzes and karaoke.

Tailored frequency response (This is the range of frequencies, from the lowest to the highest, that a mic can pick up.) is smooth and extended. Tuned specifically for vocal applications.
Cardioid (Picks up most sound in front of the microphone and some from the sides. It is less susceptible to feedback in high volume environments.) polar pattern("Polar pattern" describes how well the microphone hears sound from different directions.) picks up the most sound from in front of the Microphone and some sound from the sides. Less susceptible to feedback(Sustained howlinch when a mic 'hears' a loudspeaker already reproducing that mic's sound.) in high volume settings.
Dynamic (Dynamic mics have a simple, rugged construction and can handle very high sound pressure levels.) cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
Cartridge includes a neodymium magnet for high output level.
Durable metal construction.
On/off switch for onstage control.
Steel mesh ball grille with integral "pop" filter reduces explosive breath sounds and wind noise.
Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag.

Transducer : Dynamic
Polar Pattern: Cardioid
Frequency Response: 70 Hz - 15 kHz
Sensitivity (1 kHz): -56 dBV/Pa / 1,6 mV/Pa
Weight: 324 g



SKU: SHURE PG48-XLR

Excl. VAT £33.00 Incl. VAT £39.60
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/electro-voice-zxa1-90b-800w-active-pa-speaker-black.html

Electro-Voice ZxA1-90B 800W Professional Active PA Speaker Black

ZXA1 – the self-powered version of the best-selling ZX1 compact two-way loudspeaker. Launching globally at Winter NAMM 2010, ZXA1 is powered by an 800 watt amplifier module derived from EV’s world-tour-class Tour Grade series – amplifiers with audio quality and reliability proven at the very highest levels.

Electro-Voice ZxA1 is a compact, amplified loudspeaker system, which is designed for portable sound reinforcement applications that require maximum portability.

The ZxA1 utilizes the EV8L, a high output, low distortion, 203 mm (8 inch) woofer. The woofer is paired with the DH2005, a titanium diaphragm true compression driver. The compression driver is coupled to a rotatable 90° x 50° waveguide for smooth response to 20 kHz and excellent pattern control.

ZxA1 loudspeaker is powered by an integrated 800W, 2 channel amplifier module. The amplifier has XLR microphone
and line level inputs, as well as a XLR line level output for daisy chaining several amplified speakers or a subwoofer. The biamplified design features steep crossover slopes and woofer excursion protection for maximum output and reliability. A switchable high pass filter allows for use with a subwoofer.

The ZxA1 injection molded enclosure is made from high impact polystyrene for durability and light weight. The handle pocket and pole mount make the ZxA1 ideal for many portable applications. The ZxA1 enclosure also features a built in monitor angle for floor monitor applications. The bottom
of the ZxA1 features four #8-32 suspension points for permanent installation.

Key Features:

• Integrated 800W Lightweight Power Amplifier
• Selectable 100 Hz High Pass Filter
• Biamplified Design with Steep Crossover Slopes and Transducer Protection
• EV8L 8" High-Output LF Transducer
• DH2005 1" Exit True Compression Driver
• 90deg x 50deg Coverage Pattern
• Rotatable Horn Design
• Integral Monitor Angle on Enclosure
• Line and Microphone Inputs
• 123 dB Maximum SPL
• Built-In Pole Mount
• Integral Handle Pocket for Easy Carrying

Technical Specifications:

• Freq. Response1 (-3 dB): 60 Hz - 20 kHz
• Freq. Range1 (-10 dB): 48 Hz - 20 kHz
• Max. Calculated SPL: 123 dB
• Horizontal Coverage: 90° or 50°
• Vertical Coverage: 50° or 90°
• Amplifier Power Output: 800W
• LF Transducer: EV8L, 203mm (8 in) Driver
• HF Transducer: DH2005, 25mm (1 in) Exit
• Compression Driver
• Crossover Frequency: 1.8 kHz
• High Pass Frequency: 100 Hz, User Selectable
• Power Requirement (120V): 95V - 132V, 50 - 60 Hz, 0.6A
• Power Requirement (230V): 190V - 264V, 50 - 60 Hz, 0.4A
• Line Input: XLR and TRS Combo
• Mic Input: XLR with Independent Gain
• Line Output: XLR (Mic and Line Sum)
• Enclosure Material: High Impact Polystyrene
• Grille: Polyester Powder Coated, 18GA Galvanized Steel
• Dimensions (H x W x D): 457mm x 282mm x 264mm (17.98” x 11.12” x 10.38”)
• Net Weight: 19.0 lbs (8.6 kg)
• Shipping Weight: 22.7 lbs (10.3 kg)
Excl. VAT £378.00 Incl. VAT £453.60
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/primacoustic-london-8-room-kit-acoustic-panels.html

Primacoustic London 8 Room Kit Acoustic Panels

Primacoustic London 8 is the perfect ‘studio in a box’ for those that have small rooms but plan on growing! It features a selection of 14 high performance Broadway panels for optimal sound absorption and maximum control.

Four Broadway 12”x36” Control Columns™ are typically positioned across the sound filed listening area to help reduce first order reflections and side to side flutter echo. This is augmented with eight Scatter Blocks™ that provide control over front to back flutter echo. These are set up in a random pattern that allows some energy to be absorbed while some is left free to reflect back into the room, resulting in a semi-diffuse field and effect we call Soft Diffusion™.

Mounting is super easy! The London 8 comes complete with all mounting hardware and screws. No messy glue or expensive clean up should you decide to move. You simply screw in the Primacoustic Surface Impalers™, and hang the panels like a picture. And as with all Broadway panels, these have been tested to meet stringent class-A requirements for safe use in public spaces.

The London 8 presents an ideal solution for smaller post production suites, gaming effects, voice over and home studios.

London room kits consist of select Broadway panels and mounting hardware. Acoustic panels are constructed of high density (6lbs/pcf) rigid glass wool with resin hardened edges. The edge treatment works in tandem with the micro-mesh to fully encapsulate and contain the glass fibers. The outer fabric covering is acoustically transparent polyester and available in three neutral colors for an architecturally attractive appearance.

Installation is easy with the included mouting hardware. We even supply the screws, drywall anchors and drill bit to get you started fast.

Broadway panels have been tested to meet stringent class-1 fire ratings making them suitable for use in residential and commercial spaces.

London 8 Contents	Order No.	Pic	QTY	Model	Size	Thickness	Edge
Click images to zoom.	Z900-0105-00 (Black)   Z900-0105-03 (Beige)   Z900-0105-08 (Grey)		4	Control Columns 36*	12" x 36" (305 x 914mm)	1.5" (38mm)	Beveled
			8	Scatter Blocks	12" x 12" (305 x 305mm)	1" (25mm)	Square
			20	Surface Impalers	For mounting Control Columns and Scatter Blocks. Drywall anchors and screws included.

* Note: London 8 Control Cloumns are 12 x 36 inches and 1.5" thick (305 x 914mm x 38mm)

SKU: Primacoustic London 8

Excl. VAT £179.99 Incl. VAT £215.99
]]> Wed, 22 Feb 2012 19:57:28 +0000 http://www.commsandsound.com/electro-voice-evid-4-2-evid-black-pair-speakers.html

Electro-Voice EVID 4.2 Black Speakers Pair

EVID 4.2 is a very compact full range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. It’s shape and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications

The 4.2’s three-dimensional elliptic baffle symmetrically locates the 1” Ti high frequency element with a Coherent Coverage Waveguide in front of, and between the 4” low frequency drivers. This careful shaping, location, and 10° splaying of the lf units provides coverage control by the resulting line array. Lobing is controlled by physically “shadowing” the lf transducers from each other over the bandwidth they would normally exhibit interference. EVID’s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety.

All models are available in black or white, and can easily be painted to match the décor. Transformer versions are also available for constant voltage systems.

Line-array enhanced coverage control
Organic, unobtrusive shape
Strong-Arm-MountTM for easy, flexible aiming
Full-bandwidth overload protection
Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34
Dual LF transducers for extended bass and greater power handling and output
Ti direct-radiator HF transducer, Neodymium structure
High sensitivity
Magnetically shielded
Zinc-plated grilles
Transformer Versions

Frequency Response 1(-10 dB) 65Hz - 20kHz
Power Handling 2 200W Cont. Prog./400W Peak
Sensitivity 3 89 dB, 1W/1m
Impedance 8 ohms
Max SPL 113 dB
Horizontal Coverage4 120°
Vertical Coverage4 80°
Crossover Frequency 2.2 kHz
LF Transducer 2 x 4” (100 mm)
HF Transducer 1” (25 mm)
Protection Full System
Weather Resistance Meets Mil Spec 810 humidity, salt spray, temperature and UV, and IEC 529 IP 34 splashproof ratings
Swing x Rotation 100° x 90°
Terminals Phoenix Connector
Enclosure Material ABS (paintable)
“t” Version Wattage Taps 70V: 3.75 W70V/100V: 7.5W, 15W, 30W,8 ohm bypass
Dim (H x W x D) 12.2” x 6.9" x 8.5” (234 mm x 127 mm x 165 mm)
Net Weight (each) 8.5 lbs (3.9 kg)
Shipping Weight (pair) 19 lbs (8.6 kg)
Included Accessories SAM™, hex key

SKU: Electro-Voice Electro-Voice EVID 4.2

Excl. VAT £189.82 Incl. VAT £227.78
]]> Wed, 22 Feb 2012 19:57:28 +0000