Shure EAWXG2-10 SHURE Wax Guards for E2 earphones (5 pair)

Shure EAWXG2-10 SHURE Wax Guards for E2 earphones (5 pair) E2 E2C E2G SE102 SCL2 i2C Quietspot

Shure EAWXG2-10 Wax Guards for SCL2 Sound Isolating Earphones and E2 Earphones (5 pairs). These self-adhesive PA759 new part number EAWXG2-10 mesh screens act as a protective barrier preventing wax accumulation in the nozzle of the earphone. To accommodate their wider nozzles, the E2 and SCL2 Earphones come with special wax guards (included in Fit Kit; however, not pre-installed) for keeping out unwanted wax. Not for use with other models of Shure Sound Isolating Earphones (E3, E4, E5 and variations or SCL3, SCL4 SCL5).

Place wax guards directly on the nozzle of your earphones before using them. To place a wax guard on one of your earphones:

1) Remove sleeve from earphone nozzle.
2) Remove any debris or previously used wax guard.
3) Clean tip of nozzle with an antiseptic or alcohol wipe.
4) Ensure tip of nozzle is dry, and remove a wax guard from the supplied strip.
5) Place it on top of nozzle, adhesive side down.
6) Replace earphone sleeve.

SKU: SHURE EAWXG2-10