Shure SM137 Condensor Instrument Microphone
|
 |
 |
|
OUR PRICE
£182.44 inc. Vat
Price Match !! |
| |
|
| |
|
| |
|
| |
|
| |
"Buy Now" Adds the item to your basket.
 |
|
|
Shure SM137 Condensor Instrument Microphone
The Shure SM137 is a versatile, flat-response cardioid condenser probe microphone with an ultra-thin diaphragm for a frequency response that combines a smooth high-end with a tight, controlled low-end and a 15db pad for natural sound reproduction in both acoustic and high volume performance applications
Recommended Uses Studio Ensemble Studio Instrument Orchestra/Strings Woodwinds Acoustic Guitar Acoustic Bass Guitar Amp Piano/Organ Cymbals Percussion Stage Overhead
- Ultra-thin diaphragm for smooth high end and tight, controlled low end
- 15dB pad for performance consistency across a wider range of high SPL sources
- Low self-noise and transformerless preamplifier circuitry
Cartridge Type
Permanently Biased Condenser
Frequency Response
20 to 20,000 Hz
Directional Polar Pattern
Cardioid
Output Impedance
150 ohms (actual)
Attenuation Switch
0 dB or 15 dB attenuation
Phantom Power
48 Vdc +/- 4 Vdc (IEC26815/DIN 45 596), positive pins 2 and 3
Current Drain
5.2 mA typical at 48 Vdc
Common Mode Rejection
>50 dB, 20 Hz to 20 kHz
Polarity
Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight
- 24 mm (0.950 in.) diameter
- 162 mm (6.375 in.) long
- 195 grams (6.9 oz.)
Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
Selfnoise (typical, equivalent SPL; A-weighted (IEC 651))
Maximum SPL@ 1000 Hz
- 5000 ohms load (Attenuator on): 150 (165 dB)
- 2500 ohms load (Attenuator on): 144 (159) dB
- 1000 ohms load (Attenuator on): 139 (154 dB)
Output Clipping Level*
- 5000 ohms load: 15 dBV
- 2500 ohms load: 9 dBV
- 1000 ohms load: 3 dBV
Dynamic Range (Attenuator On)
- 5000 ohms load: 133 (136) dB
- 2500 ohms load: 128 (130 dB)
- 1000 ohms load: 122 (125) dB
Signal to Noise Ratio**
Stock Code :shure sm137
|
