01323 736690

Electro-Voice RE92H Cardioid Pattern Hanging Microphone

Electro-Voice RE92H Cardioid Pattern Hanging Microphone
Excl. Vat: £200.00 Incl. Vat: £240.00

Availability: In stock

Electro-Voice RE92H Cardioid Pattern Hanging Microphone w/ HPF Black


EV RE92 Designed specifically for applications where the condenser microphone needs to be suspended from above the sound source. The RE92H is ideal for theater, house of worship or any application where a small, high-quality mic needs to be “heard but not seen.


Other Products By EV Electro-Voice

Description

Details

Electro-Voice RE92H Cardioid Pattern Hanging Microphone w/ HPF Black

EV RE92 Designed specifically for applications where the condenser microphone needs to be suspended from above the sound source. The RE92H is ideal for theater, house of worship or any application where a small, high-quality mic needs to be “heard but not seen.

  • Hanging installation microphone
  • Wide, smooth frequency response
  • Cardioid polar pattern
  • In-line electronics module
  • 12 dB/octave switchable high pass filter
  • Transformerless differential output to drive long cables

Electro-Voice® model RE92H / RE92HW is a professional quality miniature cardioid, electret condenser microphone. It’s designed specifically for applications where the microphone needs to be suspended from above the sound source. The RE92H / RE92HW has a cardioid polar pattern for high gain before feedback, and its condenser element provides clear and natural sound reproduction. Exceptionally high sensitivity, a uniform cardioid polar response, and smooth frequency response make the RE92H / RE92HW ideally suited for distant sound pick-up. The RE92H / RE92HW is ideal for theatre, houses of worship, or any application where a small, high quality mic needs to be “heard but not seen”. The microphone is available in two colors, RE92H (Black), and RE92HW (White). The integrated wire director can be easily formed at the proper angle so that the mic points at the desired sound source. The RE92H / RE92HW comes supplied with 25 feet of cable. The cable is attached to the inline module by means of screw terminals, so that if needed, the cable can be easily shortened.

  • Generation Element: Self-Biased condenser, back electret 2- micron thick, gold sputtered diaphragm
  • Frequency Response: 40 Hz to 20,000 Hz (see chart)
  • Polar Pattern: (see chart) Cardioid
  • Sensitivity, Open Circuit Voltage, 1 kHz: 5.6mV/Pascal
  • Clipping Level (1% THD): >135 dB SPL
  • Equivalent Noise: <30 dB SPL “A” weighted (0 dB=20 micropascals)
  • Dynamic Range: >105 dB
  • Signal to Noise (RE: 94 dB SPL): 64 dB
  • Output Impedance, 1 kHz: 250 ohms
  • Power Requirements: 24 to 52 Volt Phantom Power
  • Current Consumption: 6 mA typ. with P48 supply
  • Microphone Dimensions: Diameter = 0.412" (10.5 mm)
  • Length = 1.263" (32.1 mm), less strain relief
  • Inline Module Dimensions: Diameter = 0.875" (22.2 mm)
  • Length = 5.350" (135.9 mm)
  • Cable: 0.100" (2.54 mm) diameter x 25 ft (7.6m) long
  • Polarity: Pin 2 positive, reference to pin3, with positive pressure on the diaphragm
  • Accessories Furnished: Mounting Hardware for inline module
  • Color: Nonreflecting black (H) or white (HW)
  • Environmental Conditions: Relative Humidity 0-50%: -29° to 74°C (-20° to 165°F)
  • Relative Humidity 0 to 95%: -29° to 57°C (-20° to 135°F)
  • Net Weight: 8.5 oz. (240 grams), with inline module
Additional Information

Additional Information

SKU EV Electro-Voice RE92H
Barcode No
Manufacturer Electro-Voice
Manfacturer Code RE92H
Series RE Microphones
Reviews

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.