Single gang wall mounted stereo amplifier. 8 ohms, 20 watts per channel. In Wall Amplifier
iKON AVS SGA-40 in wall stereo amplifier offers 20 watts per channel and is designed for wall and dado mounting. It is ideal for multi-room audio, classrooms, hotel bedrooms and small meeting rooms.
It is manufactured in the 50mm euro format and supplied complete with a UK size white mounting frame. Alternative frames are available in a wide range of finishes from iKON AVS as well as multiple switch plate manufacturers.
SGA40 flush mounts into a standard UK single back box and requires only a 35mm depth. It will also fit the single DIN back box.
It uses an 86% efficient class D design and has a RMS output of 20 watts per channel into 8 Ohms when powered from an 18V power supply or 10 watts when powered by the included 12V power supply, and as most quality loudspeakers are 8 Ohms, maximum efficiency is assured.
Additionally the amplifier adopts an ultra low power standby state when no signal is present.
It is fitted with two rear inputs on screw terminals for permanent connections and two 3.5mm stereo jacks on the front panel for other sources making the SGA-40 easy to install & use.
Designed with the European market in mind, the SGA-40 offers excellent reliability value for money.
Power Output , 12V Stereo Mode 10W RMS* per channel into 8 Ohms Power Output , 15V Stereo Mode 20W RMS* per channel into 8 Ohms Bandwidth 20Hz to 22KHz +/- 1dB THD & Noise 0.1% THD +noise & 70dB SNR Gain 26dBu Coupling Input: AC; Output DC. Minimum input for full power -6dB Protection Integral, auto resetting, current limit& thermal protection. ntegrated click & pop suppression Power Source 12V DC @ 2.5A ( supplied ) or 18V DC @ 3.5A Power Connector 2.1mm DC connector, centre No signal current (12V) 28mA Standby current (12V) 10mA
SKU: iKON AVS SGA-40
- Additional Information
SKU iKON AVS SGA-40 Barcode No Manufacturer CommsAndSound.com Manfacturer Code iKON AVS SGA-40 Series No