01273 930040

Signet PDA1000/2 Induction Loop Amplifier

More Views

Signet PDA1000/2 Induction Loop Amplifier
Excl. Vat: £299.00 Incl. Vat: £358.80

Availability: In stock

Signet PDA1000/2 Induction Loop Amplifier upto 900 square m coverage



Signet PDA1000/2 Induction Loop Amplifier upto 900 square m coverag SigNETs new range of professional current mode audio-frequency induction loop amplifiers 900m2

Signet PDA1000 offers outstanding sound quality at a competitive price. They are ideal for use in large prestigious applications such as theatres, churches, cathedrals, cinemas, large conference halls, etc., where first class sound and unrivalled reliability are a must. Each amplifier includes one balanced microphone input and one switchable balanced mic. or line level input, both of which will accept standard 3 pin XLR connectors. Optional 11V phantom power is also available on both inputs to allow the use of electret or condenser microphones. By popular demand, each amplifier also features a four-way Outreach input offering full compatibility with SigNETs unique Outreach Plate audio input extension system. This system allows the connection of up to 10 additional microphone or line level inputs via a range of specially designed single gang connector plates. The pre-amplification stage of each amplifier utilises an advanced signal processing system that allows tight control over the audio signal without any degradation of output quality. A metal compensation control is also provided to help offset the frequency response problems associated with excessive metal content of some rooms. Other features include three level controls (one for each input), a loop drive control, an output current meter and a compression activity display giving visible indication of the amplifiers compressor.

The Signet PDA1000/2 with up to 900 m2 is Ideal for theatres, cinemas, churches, conference halls and other applications where top quality sound is a must Attractive free-standing design (optional wall and 19inch rack-mounting kits available) Improved drive current capability provides up to 50% extra coverage than previous PDA Pro-    Range models

  • Two XLR 3 pin input sockets - one balanced mic. and one switchable balanced mic./line
  • Optional 11V phantom power available for electret or condenser microphones
  • Outreach input allows the connection ofup to 10 additional mic. or line level inputs via a series     of separately available single gang connector plates
  • Adjustable level controls provided for all inputs - can be used individually or together as a three-&nbsp   input mixer.
  • Adjustable drive control allows the loop current to be adjusted to suit a rooms individual     characteristics
  • Metal compensation control helps offset the frequency response problems associated with     excessive metal in a building.
  • True output current meter
  • Visible indication of the amplifiers compressor action via two LEDs
  • 3.5mm headphone socket allows true monitoring of the output signal
  • Advanced audio signal processing with automatic gain control (AGC)
  • On-board cooling fan on PDA500/2 and PDA1000/2 promotes stable operating temperature and     increased reliability
  • All models designed to meet or exceed the requirements of BS7594 and EN60118-4 when     correctly installed
  • Power - 230-240 V a.c. mains (PDA200/2 <150 VA; PDA500/2 <225 VA; PDA1000/2 <300 VA). IEC 320 fused mains lead supplied)
  • Inputs - Line (3 pin XLR) - impedance: 6k8 + or - input to ground; Sensitivity: 200mV 2.5V RMS balanced or unbalanced. Microphones (3 pin XLR) - impedance: 6k8 + or - input to ground; Sensitivity: 1- 8 mV balanced Phantom power: 12V switchable (on/off) Outreach (Four-way Weidmuller connector BL5. 08/4) - impedance: >10k; Sensitivity: 500mV - 6V RMS balanced Outreach Power: 16 - 21 V d.c. is available via the amplifiers Outreach Socket.
  • Output type - Current mode
  • Loop connector - Four way binding posts
  • Recommended loop impedance: 0.5 - 1 Ohm @ 1KHz. Will drive higher impedance loops with reduced area of coverage.
  • Loop drive current @ 1 Ohm: PDA200/2 - 6A; PDA500/2 - 9A; PDA1000/2 - 12A.
  • Peak loop drive current (Measured over 5mS integration time) - PDA200/2 - 8 Amps @ 1 Ohm, 13Amps @ 0.5 Ohm; PDA500/2 - 12 Amps @ 1 Ohm, 19 Amps @ 0.5 Ohm; PDA1000/2 - 14 Amps @ 1 Ohm, 24 Amps @ 0.5 Ohm
  • Recommended cable gauge: See Loop Cable Selection Graph (above).
  • Headphones: 3.5mm jack socket allows monitoring of the loop signal via >32 Ohm headphones.
  • Maximum area coverage: For a 400mA/M field strength +/- 1dB. PDA200/2 @ 6A max short term current: Square room = 200m2; Rectangular room (2:1 aspect ratio) = 240m2 PDA500/2 @ 9A max short term current: Square room = 500m2; Rectangular room (2:1 aspect ratio) = 600m2 PDA1000/2 @ 12A max short term current: Square room = 900m2; Rectangular room (2:1 aspect ratio) = 1100m2
  • Performance Frequency response: 20Hz - 14 KHz + - 3dB; Distortion: Less than 0.5 %; S to N ratio: Better than -65dB any input
  • Compressor: Gives dynamically variable compression ratio from 1:1 (no compression) to 17:1 Attack time: Approx. 10mS. Release time: Approx. 2.2S Metal Compensation: True 3dB /octave design counteracts frequency dependent absorption by metal in the proximity of the installation over a bandwidth of approximately 100Hz - 10KHz.
  • Indicators - Power on LED: Red Loop current: A five LED bar graph type meter is provided to allow monitoring of loop current output and assist in setting up the amplifier. This is provided by monitoring true output current rather than from a line level derived signal. This meter has PPM type characteristics i.e. fast attack and slow release. This allows easy reading of fast peaks. Accuracy - +-10% Compression: A two LED display is provided for indication of signal compression. The first LED shows the beginning of compression whilst the second indicates very high compression levels have been reached.
  • Controls - On/Off switch incorporated into IEC mains inlet. Four way piano key style DIP switch selects Phantom power for mic 1 & 2 XLR inputs and switches XLR input 1 between Line and Microphone settings. The fourth of the 4-in-line switch is not connected. Level controls for XLR 1 (Line/Mic switchable), XLR 2 (Mic) and Outreach. These can be used individually or any of them together, in which case they act as a three input mixer. Drive control: Sets the level of amplifier output current supplied by the amplifier. Metal compensation control. When fully anti-clockwise has no effect on the signal. When turned clockwise imparts a rising 3dB/octave characteristic to the frequency response of the amp to counteract the effect of metal in proximity to the loop.
  • Cooling Requirements - The PDA1000/2 and PDA500/2 have thermostatically controlled cooling fans, which are activated when the amplifiers internal heatsink temperature reaches approxi. 56oC. The PDA200/2 model does not require a cooling fan, as it does not generate as much heat as the larger models.
  • Dimensions - All models: Length - 380mm; Depth - 220mm; Height - 80mm
  • Weight - PDA200/2 - 3.74Kg, PDA500/2 - 3.46Kg; PDA1000/2 - 4.54Kg
Additional Information

Additional Information

SKU Signet PDA1000/2
Barcode No
Manufacturer Signet
Manfacturer Code PDA1000/2
Series No

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.