01273 930040

SigNET PDA102L Small Room Induction Loop Kit

SigNET PDA102L Small Room Induction Loop Kit
Excl. Vat: £89.99 Incl. Vat: £107.99
  • Buy 2 for £84.00 (£100.80 incl. tax) each and save 7%

Availability: In stock

Signet PDA102L Small Room Induction Loop Afils Kit upto 49m2

The PDA102S is designed for use in areas such as nursing home TV lounges where it allows hearing aid users to enjoy TV/radio broadcasts. It includes an APS scart lead, an APL dual phono Outreach connection plate, 30m of loop cable and two ‘loop in use’ stickers. Simple installation.



Signet PDA102L Small Room Induction Loop Afils Kit upto 49m2

The PDA102L is fully compatible with SigNET's unique 'Outreach Plate' audio input extension system. This system allows the connection of multiple microphone or line level inputs via a range of specially designed single gang connector plates covering the most common variants of audio connector including XLR line, XLR mic., 3.5mm jack, dual phono and 1/4" jack. A maximum of 10 plates (any mix) can be daisychained to the amplifier's Outreach socket using standard two pair audio cable

Ideal for council chambers, seminar rooms and doctors’ surgeries up to 7m x 7m in size. Includes an AMT tie/desk microphone, 30m of loop cable and two ‘loop in use’ stickers.

Audio-frequency induction loop systems work by transmitting amplified sound to hearing aids. Most hearing aids have a ‘T’ or ‘MT’ switch which allows them to pick up the electromagnetic field generated by an induction loop system. The hearing aid converts this signal to a sound suited to its user’s specific hearing requirements, allowing them to participate more fully in general conversation, ordering goods or services, etc.

SigNET’s new PDA102 audio frequency induction loop amplifier is ideal for any application requiring restricted or small area coverage. Available in a variety of cost-effective kit formats, it includes a 3.5mm microphone input (with 9V phantom power) and a unique ‘Outreach’ input which allows the connection of multiple microphone and line level inputs via a series of single gang audio connector plates. The amplifier’s input(s) can be easily adjusted for optimum performance using the rotary level control provided on its front and an adjustable drive control is also included, allowing the amplifier’s output stage to be set-up to suit the exact characteristics of any room. The PDA102’s state-of-the-art audio processor features an automatic gain control which compensates for poor microphone techniques and helps suppress loud noises, hisses and clicks. The amplifier’s true current mode amplification circuitry guarantees excellent and consistent sound quality for the hearing impaired. The amplifier is designed to be free-standing or wall-mounted using the keyholes provided and installation is further aided by the provision of two set-up indicators (Peak and Limit) and a Power on LED.

Rated supply voltage and frequency: 230VAC @ 50/60Hz
Rated power consumption: 20W
Maximum r.m.s. output current: 2.1A
Maximum peak output current: 2.8A
Maximum r.m.s. load voltage: 5.5V
Total harmonic distortion: <0.1%
Maximum area of a square loop: 49m2 (7m x 7m)
Recommended loop conductor size: 0.5mm2 @ <35metres loop length or 1.0mm2 @ >35metres to <50metres loop length (inc. tails)
Recommended number of turns: 1
Frequency response –3dB: 120Hz to 5kHz as per IEC 60118-4
Input signal level: Mic: -50dBV Unbalanced, Outreach: -10dBV balanced (referenced to full output 1kHz sine wave into 1ohm load with controls at max.)
Input impedance: Mic: 1k-Ohm; Outreach: 20k-Ohm
Microphone phantom power: 9V DC
Signal to noise ratio: -62dB
AGC Ratio: 2:1
Amplifier mode: True Current Mode
Control & indicator labels / functions: Green Power LED, Red Limit LED, Red Peak LED, Limit control, Drive control
Special features: Outreach plate connector allowing the connection of up 10 outreach plates
Connections: Mains - IEC Socket 230V 20W; Loop Output - 2 Way Push Terminal; Outreach – 4 Way Plugable screw terminal;
Microphone – 3.5mm mono jack socket
Dimensions & Weight: (H x W x D): 56mm x 136mm x 175mm (inc. connectors). Mass: 1.25 kg (excluding packing and accessories)

Additional Information

Additional Information

SKU Signet PDA102L
Barcode No
Manufacturer Signet
Manfacturer Code PDA102L
Series No

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.